When a pipe starts leaking behind a wall or a water heater stops producing hot water, the first call should land somewhere that knows the work and can scope it on the phone. We handle residential plumbing throughout Lilburn, from the everyday repairs that come up in any home to the larger jobs that follow years of deferred maintenance. Drain clogs, fixture replacements, slab leak detection, sewer line service, and water heater repair and replacement are all part of what we take on.
Call (943) 298-8995 and we will walk through what the job involves.
Rental properties and commercial buildings in Lilburn are part of the picture too. A landlord dealing with a tenant-reported backup needs the problem diagnosed and resolved without a lot of back and forth. A small business that cannot shut down for the day needs the work scoped so it fits around operations. We handle both, and the process is the same either way: the scope is confirmed on the phone, the price is settled before anything is scheduled, and the job is completed in that visit where possible.
Lilburn is a town where a good portion of the housing stock has been standing for several decades. That means the plumbing in many homes was put in with materials that are no longer sold, fittings that no longer match anything at a supply house, and pipe runs that were sized to standards since revised. Galvanized steel, polybutylene, and older cast-iron drain lines all show up regularly in this kind of housing.
Working on those systems takes more than swapping a part. A repair on galvanized pipe can reveal that the surrounding sections are corroded to the point where the fix needs to widen. A polybutylene supply line that has developed one failure has likely developed stress at adjacent fittings too. We assess what is actually in front of us before pricing the repair, and we explain what we find before any work begins.
Sometimes a call about a single leaking joint leads to the discovery that the pipe material throughout a section of the home is past its service life. That conversation happens on site, before the work proceeds, not after. The scope is updated, the new price is confirmed, and the decision is yours. Nothing is added to the job without your agreement.
Older homes in this area sometimes have fixture connections, shutoff valves, and supply stub-outs that were installed to dimensions no longer standard. That affects how a replacement is sourced and what the installation involves. We account for that when scoping the job, so the quote reflects what the repair actually requires rather than a best-case scenario.
The price for a job comes from two things: what the fault turns out to be, and what has to come apart to reach it. A drain clog that clears from the cleanout is a different job from one that requires pulling a fixture or accessing a line behind a wall. We ask the right questions on the call to narrow the scope before anything is scheduled.
When you call, you get a rate on the phone based on what you describe. That rate is confirmed before the visit is booked. If the job turns out to be more involved than the initial description suggested, we talk through the updated scope on site before proceeding. The price is explained before anything starts, so you know what you are agreeing to.
The only path to a quote is a phone call. See the page with all our plumbing work on it for how the work is handled.
Call (943) 298-8995, describe what is happening, and we will give you a price and a clear picture of what the visit covers.
We are available every day from 7:30 AM to 10:30 PM, including weekends and holidays. A burst pipe or a complete loss of hot water does not wait for a weekday morning, and neither do we. Emergency calls within those hours are taken and scoped the same way as a planned visit: the situation is assessed on the phone, the price is confirmed, and the work gets moving.
For tenants and businesses that need to stay operational, we work around the schedule where the job allows. A commercial kitchen that needs a drain cleared before the lunch service opens is a different conversation from a home repair, and we approach it that way. The plumbing done properly, start to finish, is the standard regardless of how the call came in.
A backflow preventer keeps the water supply from drawing contaminated water back into the line when pressure drops unexpectedly. The device requires periodic testing and, when it fails a test, repair or replacement. This comes up in both residential and commercial properties, and it is the kind of work that is easy to defer until an inspection flags it. We handle the testing, the repair, and the documentation the job requires.
Hard water leaves scale on fixtures, inside pipes, and inside water heaters, shortening the working life of all three. The mineral content in the regional water supply makes softener installation a practical decision for many households in this area. We size the unit to the home's water use, connect it to the main supply line, and confirm the bypass valve and drain connections before the job is called complete. Whole-home filtration systems are scoped and installed the same way.
A water heater that stops producing hot water, or produces it inconsistently, is one of the most disruptive plumbing problems a household deals with. The cause varies: a failed heating element, a tripped thermostat, a broken dip tube, sediment buildup that reduces capacity, or a tank that has simply reached the end of its service life. We diagnose the unit first and explain the options before recommending repair or replacement. Both tank and tankless units are in scope.
When multiple drains in a home are slow or backing up at the same time, the problem is in the main line, not in any individual fixture. We clear main line blockages using the right method for the obstruction: cable clearing for a straightforward clog, hydro jetting when grease, scale, or root debris has built up along the pipe wall. A camera inspection confirms the cause before the clearing method is chosen, and confirms the line is open and intact after the work is done.
A refrigerator water line that develops a slow leak behind the appliance can go unnoticed long enough to damage flooring and the wall behind it. We install, repair, and replace the supply lines that feed refrigerators and ice makers, including the shutoff valve at the supply connection. It is a small job that is worth doing properly, because a fitting that is not seated correctly or a valve that is not fully operational is a future leak waiting to happen.
Hard water carries dissolved minerals, primarily calcium and magnesium, that deposit on surfaces wherever water sits or flows. Inside pipes, those deposits narrow the bore over time and reduce flow. Inside a water heater, sediment settles at the bottom of the tank and forces the heating element to work harder, which shortens the unit's service life. On fixtures and faucets, scale builds up around aerators and valve seats and eventually affects performance.
The fix is a whole-home water softener installed on the main supply line, upstream of the water heater and all fixtures. A properly sized and installed softener addresses the problem at the source rather than treating each fixture individually. Drain and pipe work carried out to code is the standard we hold on every installation, and softener work is no exception. If you are on a private well rather than a municipal supply, the water chemistry may call for filtration alongside softening. We assess what the supply actually contains before recommending a system.
Work is carried out across Lilburn and the surrounding communities in Gwinnett County. If you are in Mountain Park, Tucker, Norcross, Stone Mountain, or Berkeley Lake, you are in our area. The same scope, the same pricing process, and the same availability apply across all of it.
If you are unsure whether your address falls within the area we cover, call and ask. We can confirm in the first minute of the conversation. Coverage is not limited to Lilburn proper.
Homes in Lilburn that were built several decades ago frequently have galvanized steel or polybutylene supply lines, cast-iron drain lines, and shutoff valves that have not been operated in years. The most common calls from those properties involve slow drains, supply line leaks, failed shutoff valves, and water heaters that have reached the end of their service life. When we scope a repair on an older system, we assess the condition of the surrounding pipe as well, so the quote reflects what the job actually requires.
Call (943) 298-8995 and describe what you are seeing.
Yes, we test, repair, and replace backflow prevention devices for residential and commercial properties in Lilburn. Testing is required periodically on many properties, and a device that fails a test needs to be repaired or replaced before it can be returned to service. We handle the full scope of that work, including any documentation the job requires.
Call (943) 298-8995 to schedule a visit or to ask what the process involves for your property type.
For most repairs, the work is tested before we leave and no follow-up check is needed. For larger jobs such as a repipe or a sewer line repair, we will tell you on the call whether a follow-up inspection makes sense and what it would involve.
Moving a bathroom involves extending or rerouting both supply and drain lines to the new location, which is a significant plumbing job. Whether it is practical depends on the layout of the existing pipe runs and the structure of the floor. Call and describe what you have in mind and we will work through what the job would involve.
We confirm what is available when you call and book the visit. A specific arrival window depends on the schedule on the day, and we work through that on the call rather than committing to a window in advance.
Working here means getting your plumbing right the first visit.
When you call (943) 298-8995, we will ask what is happening, where in the property it is occurring, and how long it has been going on.
By the end of the call, you will have a confirmed price and a scheduled visit.
Call Alpharetta Plumbing Company at (943) 298-8995 and we will take it from there.
Towns close by: Tucker, Norcross, Peachtree Corners.
Everywhere else we go is in our full list of areas.
Every plumbing job we handle starts the same way: you call, describe what is going on, and we give you a price before anything is scheduled. The table below covers the services we offer across Lilburn and the surrounding area, what each one involves, and who it fits best. Use it to find what you need, then call and we will walk through the details.
| Service | What's Included | When to Call | Good to Know |
|---|---|---|---|
| Sewer & Main Line Service | Sewer line clearing and cleaning, Camera inspection of the line, Trenchless repair and replacement, Sewer backup response | Slow drains throughout the home, sewer backups, or recurring main line problems | Trenchless methods reduce excavation and get the line back in service faster when the pipe condition allows it. |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless units, Element and thermostat diagnosis, Full unit replacement sized to the property, Gas line and water line connections | No hot water, inconsistent temperature, or an aging unit past its useful life | We diagnose the unit before recommending replacement and size the new unit to the property's actual demand, not just the closest available model. |
| Water Pressure & Shutoff Valve Repair | Pressure regulator diagnosis, Main shutoff and fixture shutoff replacement, Supply line pressure checks, Corroded section identification | Low pressure throughout the home or a shutoff valve that will not close fully | Low pressure points in several directions at once. We diagnose the cause before recommending a fix rather than replacing parts by process of elimination. |
Call us at (943) 298-8995 and we will walk through what the job involves, give you a price, and get it on the schedule.
(943) 298-8995